澳洲幸运5结果走势图

Before we get started we want to check that it is the actual fuse that needs to be repaired. First, make sure that your battery is charged. Second, you will want to turn the ignition key and check the hour meter. If the hour meter is blank, that is a solid indication that the fuse will need to be replaced. If you get a reading, it is probably not the fuse and will need a further inspection from a professional.

If you need a qualified repair center, please contact us by sending an email to repairs@profastinc.com

澳洲幸运5开奖直播下载

  1. #2 Phillips Head Screwdriver
  2. 7/16 Wrench

澳洲幸运5投注平台

Disconnect the negative cable first followed by the positive connection. Once the battery is disconnected, remove the battery.

澳洲幸运5冷热号统计

The wiring harness is secured by a clip. Lift that piece, and pull the male and female ends apart.

澳洲幸运5最新开奖号码

Once the screw is completely removed, the back cover should be free to be removed as well.

澳洲幸运5分析软件

Remove the old blown fuse and replace it with a new one. Make sure that there aren’t any defects in the new fuse before replacing it.